Tools and Specials Connectors 400 thru 600
Cable Prices
|
Parts from left to right
Stripping Tool, "N" Male Clamp, "N" Male Crimp & "N" Female Crimp. (installation of the crimp connectors requires the HX4 and Y1719) see below for details |
Part# |
CONNECTOR |
Pin Type |
Crimp/Clamp Type |
Price listed here are for reference only.
Prices are subject to the prevailing price from Times
And some items may no longer be available. |
Quantity |
|
HX4
|
Crimp Tool
(handle only) |
. |
. |
355.99EA |
|
|
Y1719
|
.429" Hex Die |
EZ400 series Connectors |
HX-4 TOOL REQUIRED |
177.75EA |
|
|
DBT01
|
Deburring Tool |
400, 500, and 600 cables |
Center Conductors |
73.80EA |
|
|
ST400EZ
|
Prep tool to install EZ-400 series connectors |
400 |
PREP TOOL for CRIMP STYLE CONNECTORS |
91.00EA |
|
|
ST400C
|
Prep tool to install TC-400 series connectors |
400 |
PREP TOOL for CLAMP STYLE CONNECTORS |
91.00EA |
|
|
ST600EZ
|
Prep tool to install EZ-600 series connectors |
600 |
PREP TOOL for CRIMP STYLE CONNECTORS |
109.49EA |
|
|
ST600C
|
Prep tool to install TC-600 series connectors |
600 |
PREP TOOL for CLAMP STYLE CONNECTORS |
109.49EA |
|
|
EZ400NMH
|
"N" Male |
Non-Solder Pin
400 size |
Crimp |
9.00EA |
|
|
EZ400NMHRA
|
"N" Male Right Angle |
Non-Solder Pin
400 size |
Crimp |
22.00EA |
|
|
EZ400NFBH
|
"N" Female BulkHead |
Non-Solder Pin
400 size |
Crimp |
20.00EA |
|
|
EZ400TM
|
TNC Male (plug) |
Non-Solder Pin
400 size |
Crimp |
10.00EA |
|
|
EZ400TMRP
|
TNC Male (plug) Reverse Polarity |
Non-Solder Pin
400 size |
Crimp |
13.00/ea |
|
|
EZ400TFRP
|
TNC Female (jack) Reverse Polarity |
Non-Solder Pin
400 size |
Crimp |
15.00/ea |
|
|
RSA3000i
|
SMA Male (plug) |
Solder Pin
400 size |
Crimp Ring |
5.00/ea |
|
|
TC600UMC
|
UHF MALE (PL259) |
Solder Pin
600 size |
Clamp |
80.99EA |
|
|
EZ600UM
|
UHF MALE (PL259) |
Non-Solder Pin
600 size |
Crimp |
40.00EA |
|
|
EZ600NMHD
|
"N" Male |
Non-Solder Pin
600 size |
Crimp |
25.00EA |
|
|
EZ600NMHRA
|
"N" Male Right Angle |
Non-Solder Pin
600 size |
Crimp |
28.00EA |
|
|
EZ600NMC
|
"N" Male |
Non-Solder Pin
600 size |
Clamp |
34.00EA |
|
|
EZ600NFBH
|
"N" Female |
Non-Solder pin |
Crimp |
27.50EA |
|
|
EZ600TM
|
TNC Male |
Non-Solder Pin
600 size |
Crimp |
24.00EA |
|
|
|
|
LMR-100 use RG174/U size connectors. LMR-200 use RG58/U size connectors.
LMR-240 SIZES: USE PN:401TS (PL259) W/403S (UG176 REDUCER) or 6633S W/403S (UG176 REDUCER). LMR-300 & 400 SIZES: USE PN:401TS (PL259), PN:6633S (N MALE), PN:RFN-1024-1si (N FEMALE), PN:RFB-1101-1si (BNC).
Updated: April/29/2013 22:47 (UTC/GMT) |
NOTES: 1.Center Conductor: LMR-1700, 1200, & 900: Bare Copper Tube.
LMR-600, 500, & 400: Solid Copper Clad Aluminum.
LMR-600, 400, & 240UF: Stranded Bare Copper.
LMR-200, 240, & 300: Solid Bare Copper.
LMR-100: Solid Bare copper covered steel.
2.Dielectric: Low Loss, closed cell polyethylene foam.
3.Shields: Aluminum LaminatedTape bonded to the dielectric w/tinned copper overall.
4.Jackets: Black UV protected Polyethylene. LMR-600,400 & 240UF TPE Jacket(-40 + 185F).
5. Less than 1 ohm Impedence change at bend.
Note: Cables with "DB" have a polymeric flooding compound under the jacket for extreme (commercial) Direct Burial applications.
Technical information listed herein is provided as a guide only. Therefore, we are not responsible for typographically errors.
Updated: April/29/2013 22:47 (UTC/GMT) |
