UHF CONNECTORS
|
|
401TS
On Special!
PL259 UHF Connector. Silver, Teflon®.
Fits: RG213/U, CXP1318FX, CNT-400 Fits: RG58A/U CNT-195 (reducer 402) & RG8X (reducer 403).
PL259 connectors are a low cost, non-constant impedance general purpose connector, which operate satisfactorily from DC to 300MHz.
1pc $2.99ea
10-24 $2.79ea
25-49 $2.49ea
50-99 $2.09ea
100+ $1.99ea
|
402
UG175 Reducer Nickel Plated
Use with 401TS &/or 6633S to fit RG58/U sizes etc.
1-49pcs $.99ea
50-99pcs $.89ea
100pcs .80ea
|
403
UG176 Reducer Nickel Plated
Use with 401TS &/or 6633S
to fit RG8X-Mini sizes etc.
1-49pcs $.99ea
50-99pcs $.89ea
100pcs .80ea
|
|
406
2 inch UHF BulkHead
UG-363/U
$4.99ea
|
UG3636
6 inch UHF BulkHead
$5.99ea
|
UG3634
4 inch UHF BulkHead
$5.49ea
|
|
407TS
4 Hole Chassis UHF Connector
Silver, Teflon®, Gold Pin
1-4 $5.99ea
5-9 $5.69ea
10-24 $5.39ea
25/UP $5.09ea
|
RFU532
UHF RIGHT ANGLE MALE to FEMALE
Nickel, Silver, Delrin
$4.99ea
|
RFU533
UHF "T" ADAPTER FEMALE/MALE/FEMALE
Nickel, Silver, Delrin
$6.49/ea
|
|
RFU534
UHF "T" ADAPTER FEMALE/FEMALE/FEMALE
Nickel, Silver, Delrin
$5.99ea
|
RFU536
UHF Double Female Splice
Nickel, Silver, Delrin
PL258
$3.49/ea
|
RFU538
UHF Double Male Splice
Nickel, Silver, Delrin
$4.99/ea
|
CONNECTOR MATING TIPS:
Before joining connectors, inspect mating surfaces for dirt, dust, debris and bent or broken contacts. When mating connectors, always turn the coupling nut rather than the body. Many connectors are destroyed by over-torquing the coupling nut. In general, the tighter you make the coupling mechanism, the better the performance. Paired connectors tend to be inductive due to gaps of various types. While tightening down on the coupling nut will close many of these gaps, it also permanently modifies the shape of the connector components. If you must use pliers on the coupling nut, wrap a piece of rubber around the nut and stop when you meet solid resistance. Use a torque wrench for mating threaded adapters or cable assembly terminations when the reciprocal connector is mounted to equipment. Over torquing of plugs (male) can damage the instrument's jack (female) and the adapter or cable connector. This will also void the product warranties.
Updated: June/02/2010 21:11 (UTC/GMT) |
INTERSERIES ADAPTERS
|
|
306
UHF Female to BNC Male, UG-255/U
1-4 $3.99/ea
5-9 $3.79ea
10-24 $3.59ea
25/up $3.19ea
|
609
UHF Female to N Male, UG146/U
1-4 $5.99ea
5-9 $5.69ea
10-24 $5.39ea
25/up $4.79ea
|
611
N Female to UHF Male, UG83B/U
1-4 $4.99ea
5-9 $4.74ea
10-24 $4.49ea
25/up $3.99ea
|
|
104
COAX SEAL
Packaged for easy field installation. Used with confidence by commercial installers & Amateur Radio operators worldwide.Does 9 terminations per package.Simply wrap around the connector termination,
mold together, and in a few days it seals to itself.
Preventing moisture & corrosion. For best results use with STUF.
$3.99/EA
|
STUF
Teflon® Dielectric Waterproofing Filler.
Simply put a dollop into the male connector first, then screw onto the female connector and
the back pressure fills the voids between the threads, and this prevents moisture from penetrating into the connectors.
Improves electricals, and will not harden.
For best results use with COAX SEAL.
$6.49/ea
|
SAPK
Get all three; Coax Seal, Stuf, and Progold in one package and save $2.98
14.49/pk
|
Progold
ProGold®
Conditioning Treatment. Maximum Performance & Protection for Connectors, Switches, & Contacts. |
ProGold® Features & Benefits
|
Improves Conductivity
Maintains Optimum Signal Quality
Protects Base Metals from Oxidation
Forms Protective Anti-Tarnishing Layer
Reduces Arcing, RFI and Intermittent Connections
Reduces Wear and Abrasion
Temperature Range, -45 C (-49 F) to +310 C (590 F)
ProGold is a unique conditioning solution that improves conductivity and provides long-lasting protection on gold, base metals and other precious metal contacts and connections (gold, silver, rhodium, copper, bronze, nickel, etc.). Use on plated connectors, contacts and metal surfaces for maximum performance and protection. Recommended for critical applications where only slight cleaning action is necessary. If the surface looks clean, applying DeoxIT Power Booster first is usually not necessary. ProGold is designed to dissolve small amounts of oxidation. Apply ProGold after DeoxIT on plated metal surfaces, except where noted with PreservIT below. The more critical the connection or part, especially low current applications, ProGold should be the final step. For reference, ProGold has approximately 0.5% cleaning action.
Cleaners: Enhancers
Enhancers: Connector
Enhancers: Electric Contact
Enhancers: Electric Switch
Inhibitors: Corrosion
Lubricants: Electric Contact
Lubricants: Electric Switch
Sealants: Connector
Sealants: Electric Contact
Sealants: Electric Switch
Updated: June/02/2010 21:11 (UTC/GMT) |
